For quite a while, since I began to feel more comfortable with using my DSLR on manual mode, I had the desire to get into film photography of a while, being pinhole photography the first milestone.
However, for me to deal with film photography, the only practical choices were 35mm film or 120 film, in regards to availability. My main choice was 120mm due to the fact that the negatives are larger, making it more practical to handle and to make contact prints in the future. The unfortunate side effect is that it is harder to load into the film spiral during film development preparation. And, of course, way less exposures per roll than 35mm film. Another point to consider is camera price. A 120 film camera is, in general, more expensive that a 35mm camera.
My budget for the camera was set to 120€. In one hand I could get a Holga 120N pretty cheap and call it a day. Lets just say I quickly changed my mind.
The other choice was to get a Twin Lens Reflex (TLR) camera. But due to most if the cameras on my price range being used cameras (and 100% mechanical), I was wary of getting then on ebay, therefore I’ve decided to source the camera locally, at a store that could sell me a clean and tested camera. Unfortunately such stores are 50Km away, in a neighboring town.
The camera that fulfilled my criteria without looking like a dug up, rusty fossil, or a plastic toy was the flexaret VII automat.
On paper, 1/500 sec maximum shutter speed sounds quite nice, but it also means that the camera uses a more complex leaf shutter design.